Product ID:NEO-SEAL GASKET CEMENT
MSDS Date:01/02/1991
FSC:8040
NIIN:00F037386
MSDS Number: BWHYG

I HORG INDUSTRIAL CO LTD

NO 25-1, TA YEH SOUTH ROAD
HSIAO KANG DISTRICT, KAOSHING
US

Emergency Phone: 814-864-0789/455-0921

Info Phone: 814-864-0789/455-0921

Cage: IHORG

I HORG INDUSTRIAL CO LTD

HSIAO KANG DISTRICT, KAOSHING US

Telephone: 814-864-0789/455-0921

Cage: IHORG

NEOPRENE, 2 CHLORO-1, 3-BUTADIENE HOMOPOLYMER, CHLOROPRENE

CAS: 9010-98-4

RTECS: EI9640000

Fraction By Weight: 35-40%

ALKYL PHENOLIC RESIN

Fraction By Weight: 25-30%

COLUMBIA CARBON, CARBON BLACK, LAMPBLACK, BLACK PEARLS

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1-5%

OSHA PEL 3.5 MG/CUM

ACGIH TLV: 3.5 MG/CUM

TOLUENE (IARC - GROUP 3) *94-3*

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 37%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 0.40%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ACETONE; DIMETHYL KETONE; 2-PROPANONE

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: <0.05%

OSHA PEL 2400 MG/CUM

ACGIH TLV: 750 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION. INGESTION: GI
IRRITATION. ASPIRATION OF MATERIAL INTO THE LUNGS CAN CAUSE
CHEMICAL PNEUMONITIS WHICH CAN BE FATAL. INHALATION: VAPORS CAN
CAUSE NASAL & RESPIRATORY IRRITATION/ ASPHYXIATION. SKIN:
PROLONGED/REPEATED CONTACT CAN CAUSE MODERATE
IRRITATION/DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, TEARING, BLURRED VISION,
NAUSEA, VOMITING, DIARRHEA, DIZZINESS, WEAKNESS, FATIGUE, HEADACHE,
UNCONSCIOUSNESS, ASPHYXIATION.

First Aid:EYES: FLUSH W/PLENTY OF WATER. INHALATION: REMOVE TO FRESH
AIR. GIVE OXYGEN/CPR IF NECESSARY. SKIN: THOROUGHLY WASH W/SOAP &
WARM WATER. INGESTION: ASPIRATION HAZARD. DON'T INDUCE VOMITING.
OBTAIN MED ICAL ATTENTION IN ALL CASES.

Flash Point Method:CC
Flash Point:<32F
Lower Limits:1.2
Upper Limits:7
Extinguishing Media:FOAM/WATER FOG, DRY CHEMICAL/CO2
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS W/FULL
FACEPIECE OPERATED IN PRESSURE DEMAND/OTHER POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL ALONG THE GROUND/BE
MOVED BY VENTILATION & IGNITED BY SPARKS/HEATERS/OTHER IGNITION
SOURCES AT LOCATIONS DISTANT FROM HANDLING POINT.

Spill Release Procedures:SMALL: ELIMINATE IGNITION SOURCES. PERSONS
W/OUT PROTECTIVE EQUIPMENT SHOULD BE EXCLUDED FROM AREA UNTIL
CLEAN-UP IS COMPLETED. USE ABSORBENT & SHOVEL INTO CONTAINERS FOR
DISPOSAL. LARGE: DESTROY BY L IQUID INCINERATION.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED. KEEP AWAY FROM
HEAT/SPARKS/FLAMES. ALL FIVE GALLON PAILS & LARGER METAL CONTAINERS
SHOULD BE GROUNDED/BONDED WHEN TRANSFERRED.
Other Precautions:NEVER STORE/MIX W/OXIDIZERS. NEVER USE
WELDING/CUTTING TORCH ON/NEAR DRUM, EVEN IF EMPTY. PRODUCT/RESIDUE
CAN IGNITE EXPLOSIVELY.

Respiratory Protection:IF TLV IS EXCEEDED, A NIOSH/MSHA JOINTLY
APPROVED AIR SUPPLIED RESPIRATOR IS ADVISED.
ENGINEERING/ADMINISTRATIVE CONTROLS SHOULD BE IMPLEMENTED TO REDUCE
EXPOSURE.
Ventilation:LOCAL EXHAUST/MECHANICAL EXPLOSION PROOF.
Protective Gloves:POLYETHYLENE
Eye Protection:CHEMICAL SPLASH GOGGLES/SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Boiling Pt:B.P. Text:110F
Melt/Freeze Pt:M.P/F.P Text:194F
Vapor Pres:38
Vapor Density:4.5
Spec Gravity: 0.95
Evaporation Rate & Reference:(BU AC=1): 1.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK VISCOUS LIQUID W/AROMATIC HYDROCARBON ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS; LIQUID CHLORINE, STRONG ALKALIES & STRONG MINERAL
ACIDS.
Stability Condition to Avoid:HEAT, SPARKS, FLAME/OTHER IGNITION
SOURCES.

Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DEPOSITED IN A
LANDFILL IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.